How to Fix Hair Clippers That Won’t Cut

how to fix hair clippers that won’t cut
Spread the love

Learning how to fix hair clippers that won't cut is typically more straightforward than you’d think, as you likely won’t have to go into the mechanical features of the unit to get them back to their original condition.

Better yet, you may still have a warranty on your clippers, which could enable you to get a brand new pair for free depending on how you are covered and what has happened.

Whether you’re getting ready to groom your pet or using your clippers yourself, figuring out why they’re not working is of the utmost importance.

In this guide, we’ll go over the top troubleshooting tips that you can use to your advantage when trying to fix your clippers.

You’d be surprised at how sensitive clippers can be, even though they are cumbersome duty grooming tools.

How to Fix Hair Clippers That Won't Cut

It’s more than likely your clippers are dealing with a clogged blade or a misaligned blade, which is why they aren’t willing to cut.

Thankfully, these are two issues that are simple to fix.

Let’s go over the most common problems your clippers might experience over months or years of using them.

1. Hair Blockage

Many pet parents don’t realize that even the thinnest coats can tend to clog your clippers, preventing the blades from moving correctly, if at all.

More than likely, if your clippers aren’t working appropriately, there may be hair caught in an essential location that can easily be removed with items you have in your kit or lying around the house.

Using a small brush, such as a blade cleaning brush, you should be able to get rid of any blockages.

Be sure to follow these simple steps:

Step 1: Remove the blades and get rid of clogs.

First, you will want to remove the blades from the clipper, ensuring that you brush them off thoroughly.

You can also use your blade cleaning brush to sweep away any hair that may catch inside of the clippers.

For deeper clogs, consider using a pin or a clip to get rid of any tangles that you can’t reach with the brush.

Step 2: Disinfect the blades.

Once the clog has been removed, you can then take alcohol and wipe down the blades that you had taken out previously.

Step 3: Use blade or baby oil.

After disinfecting the blades, use a blade oil or baby oil to smoothen the surface, which is ideal for ensuring the clippers move to the best of their ability.

Step 4: Get rid of extra hair and dirt.

Reattach the blades and then fill a container with hot water and a mild detergent.

If the clippers are waterproof, turn them on and dip the blades into the solution, allowing the blades to run while submerged.

This process will help to get rid of any extra hair that might be lying around as well as get rid of any hidden traces of dirt.

If a hair clog was the root cause of your clippers not working, they should be working to the best of their ability now.

2. Charging the Battery

You would think that most manufacturers would have an LED indicator to let you know when your clippers are at a full charge; unfortunately, this is not always the case.

It’s a good idea to invest in a pair that lets you know how much battery life you have left to make sure this particular problem doesn’t happen again.

If you have tried to turn your clippers on only to find the blades aren’t moving, the batteries might be dead.

Your next step is to plug the clippers into an outlet that you know works and provides the correct amount of voltage.

Allow the device to charge for two to three hours before trying to turn them on, as you’ll want to enable the batteries to take a healthy charge.

For pet parents who own clippers without a battery indicator, it’s a good idea to maintain the practice of charging them after you’ve finished grooming as well as before you start grooming.

If they don’t turn on, it might be time for you to change the batteries, as this can typically happen after several months of using the clippers continuously.

how to fix hair clippers that won’t cut

3. Changing the Battery

Cordless clippers will always have an internal power source that enables you to use them without being plugged into a wall at all times.

Even though it would be convenient if the battery lasted forever, that’s not always the case, especially if you’ve purchased a set that doesn’t have rechargeable ones.

This is when your warranty might come into play; if you had bought the clippers recently and the built-in battery is already broken, the manufacturer should replace it free of charge.

Otherwise, you will have to open your hair clipper, which is something that can be done with the help of the user manual that came with the unit.

If you can’t find the instructions, you can typically search for them online and figure out how to open your specific model.

Be sure not to damage the sides of the casing when you open them, as your clippers need a tight seal.

Once you have taken the body apart, you should be able to see the battery.

More often than not, the battery is effortless to remove; all you have to do is unplug and remove it.

Take note of the type of battery, as you may have to order a replacement if you don’t already have one at home.

Put the new battery into the existing spot, close the clippers, and try turning them on.

4. Blade Replacements

The essential part of any pair of clippers is the blade, and over time, you can guarantee it’s bound to deteriorate.

Even clippers that advertise having self-sharpening blades will need to be replaced at one point; otherwise, the entire unit may experience a malfunction.

Fortunately, blade replacements are easy to find and easy to do on your own, as most clippers are specifically designed for this task.

Most often, you should be able to either pull the blades out yourself or pop off the cap and unscrew the blades.

As you go through this process, you will also be able to tell if the blades are misaligned or loose, which could also be the cause of a problem.

If this is the case, tighten the blades or align them appropriately and try turning the clippers on again to see if they work.

If not, you will need to order new blades and put them into the same position that the others were in.

Most often, manufacturers will be able to sell you replacement blades or send them to you for free, depending on your warranty.

You’ll also find that the specific instructions for blade replacement will be included in your user manual, as each pair of clippers is different.

5. Extensive Oiling

Pet owners who have used the same set of clippers but have never oiled the blades may need to take a couple of extra steps when it comes to oiling them for the first time.

Blades can lock up for several reasons, including rust (on lower-quality sets) and hair clogs, which can be removed using the above process.

One of the best things you can do for your clippers is to give them extensive oiling.

By removing the blades and dousing them in oil, you can then reassemble the unit and let it sit for a couple of days.

This process allows the oil to make its way to any parts that may be locked up, allowing the blades to move freely once again.

Although this process takes longer than the other troubleshooting tips on this list, it could be the sole reason as to why your clippers have stopped working.

6. Manufacturer Defects

It’s important to note that every manufacturer creates hundreds of thousands of products regularly, and there are bound to be a few hundred that encounter issues.

This is why companies offer a warranty, as they want to ensure that you are fully satisfied and are covered in the event of manufacturer defects.

You might find that your clippers not working isn’t because of something you’ve done, but instead, is a result of a manufacturer’s defect.

Before you opt to purchase a new set of clippers, it is highly recommended that you send your existing pair back to the manufacturer so that they can inspect them and determine what the issue is.

You will especially want to take the time to do this if you’ve spent a lot of money on your clippers, and they have become your favorite grooming tool.

Typically, you will be able to email or call their customer service team to receive a return shipping label so that you can send them back.

Generally, within a few weeks, the manufacturer will either send you a replacement or let you know that the product is not covered by warranty.

If the issue is visible, the customer service team can let you know whether you are covered or not.

To help save you a hundred (or more) dollars, taking advantage of your warranty can be well worth it.

7. Buying a New Pair

If you have tried all of the top troubleshooting tips and your clippers still aren’t working, it could be time to head out to purchase a new set.

Even though it can be quite the investment, you’ll be able to choose a pair that has more modern features and better conveniences that you wish your existing clippers had.

For example, an intuitive LED screen or corded and cordless operation are great features to have.

You can easily find dog clippers for an affordable price that power through all types of coats with ease.

They are also available in several sizes, whether you need all-over clippers for a thorough groom or if you need touchup clippers for small and sensitive areas.

Many clippers also come with an assortment of grooming tools, such as scissors, combs, and clipper cleaning kits.

To find the perfect pair, all you have to do is a little bit of research into the best dog clippers so that you can have a higher quality set that isn’t likely to break again shortly.

Final Thoughts

Most often, using these troubleshooting tips will be the easiest way to learn how to fix hair clippers that won't cut.

Plenty of pet parents may forget to clean them out after every use, which helps to remove clogged hair.

These quick and easy steps are more than likely to resolve your problem and, if not, refer to your warranty or consider buying a brand new pair.

Click here to add a comment

Leave a comment: